جهاز أوتوماتيك مضخة مياه بنظام "إيزي برس" وضغط تشغيل مرتفع 2 بار للتحكم الذكي وحماية المحرك من الجفاف مع مخرج 1 بوصة وتصميم هيدروليكي متطور بمواصفات أوروبية معتمدة من شركة جبالي تولز من HAPPY موديل (EPC-1 / 2 BAR)
وصف المنتج
The HAPPY water pump automatic device, model (EPC-1) with an operating pressure of 2 bar, is the advanced and most powerful option in the category of smart control devices known as "Easy Press". This model is specifically designed for homes and villas that require high water pressure and immediate response. It functions as a highly accurate electronic regulator that monitors water flow and pressure in the network. This product is officially approved in Jordan through the distributor "Jabaley Tools Company".
The strength of the 2 Bar version lies in its ability to significantly enhance the efficiency of your pumping system; the device commands the pump to operate as soon as the network pressure drops to 2 bar, meaning it provides greater water pressure for faucets and showers, especially in buildings with multiple consumption points or advanced irrigation systems. In addition to the pressure boosting feature, the device offers comprehensive protection for the pump against burnout, making it an essential investment for every modern household water system.
Advanced Technical Features of the EPC-1 (2 bar) Device
- Smart High-Pressure Control (2 BAR): Provides higher operating pressure than traditional models, ensuring strong and consistent water flow on upper floors and in areas far from the pump.
- Dry-Run Protection System: The device cuts off the electrical current to the pump immediately upon sensing a lack of water supply, protecting the motor's copper windings from damage and burnout due to empty rotation.
- Interactive Indicator Lights (Status LEDs): The device features a simple control panel that shows the operating status (Power), pump operation (On), and fault status (Failure), which simplifies system monitoring.
- Integrated Check Valve: The device prevents water from flowing back into the pump, maintaining stable pipe pressure and reducing the number of pump start-ups and shutdowns, which extends its lifespan.
- Durable Engineered Structure: Made of reinforced plastic materials that withstand high operating pressures and are resistant to hydraulic shocks, with complete electrical insulation (IP65) for protection against moisture and water.
- Manual Restart Button: Allows you to easily restart the system after ensuring water is restored, without the need to disassemble or install any parts.
Engineering Analysis: Why is the 2 bar version preferred?
In the hydraulic design of large homes, operating pressure plays a crucial role. The EPC-1 device with 2 bar pressure ensures that the pump only operates when high pressure is needed, which prevents pressure fluctuations during use. Thanks to the sensitive electronic circuit within HAPPY devices, flow is sensed even at low levels, preventing sudden water interruptions during showering. This model is perfectly compatible with 1 HP and 1.5 HP pumps, as it can intelligently direct their power to serve the home with high European efficiency.
Technical Specifications of HAPPY EPC-1 (2 BAR) Device
| Model | EPC-1 (Automatic) |
|---|---|
| Brand | HAPPY |
| Starting Pressure | 2 BAR (High 2 bar) |
| Operating Voltage | 220 - 240 V |
| Max. Continuous Current | 10 A |
| International Protection Rating | IP65 (Complete Isolation) |
| Authorized Distributor | Jabaley Tools Company |
| Connection Type | 1 inch (In/Out) |
Installation Guidelines for Maximum Water Pressure
To ensure the Easy Press (2 bar) device operates optimally, it must be installed in a vertical position to ensure accurate internal sensor operation. It is recommended that the highest consumption point (faucet) does not exceed 15-18 meters above the device level to ensure the 2 bar pressure can smoothly open the flow valve. Additionally, the quality of electrical wiring must be checked, and wires of appropriate diameter should be used to ensure sufficient current reaches the pump through the device, which protects the electronic circuit from damage due to voltage fluctuations.
Why Choose HAPPY EPC-1 (2 BAR) from Salim Katana Company?
- Amazing Pumping Power: Thanks to the 2 bar pressure, solar heaters, filtration systems, and sprinklers will operate with unprecedented efficiency.
- Safety and Reliability: The device is designed to withstand long working hours and weather conditions in Jordan, thanks to its international manufacturing quality.
- Maintenance Savings: Protecting the pump from dry running means you won't have to repair or replace the pump motor frequently.
- Technical Support and Warranty: Salim Katana Company provides you with a genuine warranty and original spare parts, making your purchase a safe and guaranteed investment.
Sustainability and Luxury in Water Distribution
Owning a HAPPY EPC-1 device with 2 bar pressure means upgrading your home's water system to a professional level. This device not only provides you with automatic convenience but also contributes to extending the lifespan of your entire plumbing network by regulating pressure and preventing sudden water hammers. Thanks to its advanced European engineering, you will get smart water flow that meets your modern needs, with savings on your electricity bill due to optimized and carefully managed pump operation. Choose HAPPY for a hassle-free water experience with the highest global quality standards.
Automatic water pump device with "Easy Press" system and high operating pressure of 2 bar for smart control and dry-running protection of the motor, with a 1-inch outlet and advanced hydraulic design with European specifications, approved by Salim Katana Company from HAPPY model (EPC-1 / 2 BAR)